specification model lpv-20-5 lpv-20-12 lpv-20-15 lpv-20-24 dc voltage rated current current range rated power output line regulation load regulation setup, rise time note.6 hold up time (typ.) voltage range note.4 frequency range efficiency (typ.) ac current (typ.) input inrush current(max.) leakage current safety standards working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over current over voltage 5v 12v 15v 24v 3a 1.67a 1.33a 0.84a 0 ~ 3a 0 ~ 1.67a 0 ~ 1.33a 0 ~ 0.84a 15w 20w 20w 20.2w 80mvp-p 120mvp-p 120mvp-p 150mvp-p 5.0% 1.0% 2.0% 500ms, 20ms / 230vac 5 at full load 00ms, 20ms / 115vac 90 ~ 264vac 127 ~ 370vdc 47 ~ 63hz 77% 81% 83% 83% 5.75 ~ 6.75v 13.8 ~ 16v 17.5 ~ 21v 28 ~ 32v 0.55a/115vac 0.35a/230vac cold start 35a/115vac 70a/230vac 0.25ma / 240vac 110 ~ 150% rated output power protection type : hiccup mode, recovers automatically after fault con dition is removed compliance to en55022 (cispr22) class b, en61000-3-2 class a, en610 00-3-3 compliance to en61000-4-2,3,4,5,6,8,11, en55024, light indust ry level, criteria a -30 ~ +70 (refer to "derating curve") 20 ~ 90% rh non-condensing -40 ~ +80 , 10 ~ 95% rh 0.03%/ (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes ul879, ul1310 class 2, can/csa c22.2 no. 223-m91, ip67 approved ; design r efer to tuv en60950-1, en61347-2-13 786.5khrs min. mil-hdbk-217f (25 ) 118*35*26mm (l*w*h) 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. derating may be needed under low input voltage. please check the static ch aracteristics for more details. 5. the power supply is considered as a component that will be operated in comb ination with final equipment. since emc performance will be affected by t he complete installation, the final equipment manufacturers must re- qualify emc directive on the complete installation again. 6. length of set up time is measured at first cold start. turning on/off the pow er supply may lead to increase of the set up time. 7. suitable for indoor use or outdoor use without direct sunlight exposur e. please avoid immerse in the water over 30 minute. 0.22kg; 60pcs/14.2kg/0.62cuft protection type : shut off o/p voltage, clamping by zener diode 20w single output switching power supply constant voltage designuniversal ac input / full range withstand 300vac surge input for 5 seconds protections: short circuit / over current / over voltage cooling by free air convection fully encapsulated with ip67 level ass lps suitable for led lighting and moving sign applications100% full load burn-in test low cost, high reliability 2 years warranty small and compact size (note.7) fully isolated plastic case class power unit, no fg p features : l p v- 2 0 s e r i e s ripple & noise (max.) note.2 voltage tolerance note.3 environment safety & emc protection 50ms/230vac 16ms/115vac at full load withstand voltage isolation resistance i/p-o/p:3kvac i/p-o/p:>100m ohms / 500vdc / 25 / 70% rh file name:lpv-20-spec 2011-06-24 ip67 lps emc immunity emc emission
mechanical specification case no. 972a unit:mm fosc : 65khz detection pwm circuit o.l.p. o.v.p. emi filter rectifiers power switching filter & rectifiers +v -v i/p control & block diagram (horizontal) ac/n(blue) ac/l(brown) recommend mounting direction 17 t case 28 2- 3.6 35 t case: max. case temperature. ul1015 18awg ul1015 18awg load (%) -15 0 15 30 20 40 60 80 100 input voltage (v) 60hz 90 100 125 135 145 155 165 175 180 200 230 264 100 90 80 70 60 50 40 load (%) derating curve load (%) 0 40 50 derating curve static characteristics ambient temperature ( ) load (%) -30 60 70 175 load (%) 20w single output switching power supply l p v- 2 0 s e r i e s +v(red) -v(black) 600 30 118 3.5 3.5 3.5 3.5 600 30 26 file name:lpv-20-spec 2011-06-24
|
